Remote Wire For Amp Not Getting Power

Five star car stereo 170 331 views. What is an amplifier remote turn on wire.

Amp Remote Has No Power Solution Vw Eonon Youtube

One of the more common things we come across when troubleshooting amplifier installation problems related to remote turn on is when the amp will not turn on often a result of not running a remote turn on wire at all or connecting it to a wire that doesn t receive voltage when the.

Remote wire for amp not getting power. Most radios cut power to the antenna when the radio is in cd or tape mode. Testing the remote wire is similar to testing the hot lead or main power wire. Can you clarify the question.

Almost every aftermarket head unit has a remote turn on wire. If it doesn t you ll want to check for any inline fuses and verify that the wire isn t loose corroded or shorted out somewhere. The power antenna is the same just a low voltage to turn the antenna on.

Not helpful 16 helpful 23. Does the head unit have a remote connection and the amp not. If you use the power antenna wire there is a good chance that the amp will only work when the radio is on fm or am.

However i discovered by accident that if i touch the 12v power wire coming from the battery to the remote hookup wire it gets constant power and works fine. The remote wire is only for turning the amp on not for powering the amp. Do not run a jumper wire from power to remote turn on.

Some manufacturers call it a power antenna wire. Remove the wire and find the correct remote amp then turn on wire or ignition wire to the vehicle. If your amp plugs into the wall test the power cord.

But if i get the ground to the ground the. Amp not getting power. The remote antenna power wire is responsible for the antenna coming out of a car with a retractable antenna.

Car amps for instance often have a red power wire and a black ground wire. If you have a head unit without an amp controller line the. If the remote lead is supplying power to the amp it s time to check the output side of the amp by testing your speakers and speaker wires.

The power wire is the next thing to check if you find no problems with the remote wire. The trick here is to be sure the radio is on as this is what tells your amp to power up. Does the amp have a remote wire and the head unit not.

It also has a blue remote turn on wire that powers the amp when you turn on your vehicle. Do neither unit have a remote connection. How to connect a power wire to your car stereo amp duration.

Hence the term remote turn on wire. But regardless of the label all it does is output a positive 12 volts when the head unit is turned on. Also make sure your guitar speakers subwoofers and other devices are connected to the amp if you re using them.

This wire will be much thicker than the remote wire and it should have battery voltage. I have everything hooked up correctly except i get no power when i turn the car on or acc. It should be noted that some head units have both a remote turn on wire and a power antenna wire.

Connecting Your Car Speakers To An Amp Use Your Factory Wiring